A C Apling, D Montaldo and P A Young, "Cyclones in an ore grinding context." G Priestley and H S Stephens (Eds), Hydrocyclones, International Conference on Hydrocyclones, Churchill College, Cambridge, pp 13-25, 1980. British Hydraulic Research Association, Cranfield.
A C Apling, D Montaldo and P A Young, "Development of a combined comminution, classification and flotation model." XIVth International Mineral Processing Congress, Toronto, Canada, Volume III, pp 4.1-4.11, 1981. Canadian Institute of Mining and Metallurgy.
A C Apling, "Some excuses for playing with plant models." Leeds University Mining Association Journal, pp 11-15, 1983, Leeds University Press.
A C Apling, "Blinding of screens by sub mesh sized particles." Transactions of the Institution of Mining and Metallurgy, Volume 93, section C, pp C92-C94, 1984.
A C Apling, "A design for modern flocculants." Leeds University Mining Association Journal, pp 42-48, 1984, Leeds University Press.
A C Apling, "Measuring screen performance". Mine and Quarry, Volume 14, number 4, pp 31-35, April 1985.
A C Apling and G Osborn, "Flotation mechanisms in an industrial rougher bank." Leeds University Mining Association Journal, pp 69-77, 1985, Leeds University Press.
A C Apling and S Ersayin, "The reproducibility of semi-batch flotation test work when using the Leeds Open Top Cell and of derived kinetic parameters." Transactions of the Institution of Mining and Metallurgy, Volume 95, section C, pp C83-C88, 1986.
A C Apling and S Anac, "A comparison of specific energy based grinding kinetics derived from laboratory and plant test work." K Leschonski (Ed), World Congress Particle Technology, Part II, 6th European Symposium on Comminution, Nuremberg, pp 177-191, 1986. N M A Nurnberger Messe und Ausstellungsgesellschaft, Nurnberg. European Federation of Chemical Engineers.
A C Apling and G Osborn, "A practical simulation of an industrial rougher flotation bank." L E Fielding and A R Gordon (Eds), Publications of the 13th C M M I Congress, Singapore, Volume 4, Metallurgy, pp 25-31, 1986. Australasian Institute of Mining and Metallurgy, Parkville, Victoria.
A C Apling, "Dry separation techniques in mineral processing." Leeds University Mining Association Journal, pp103-115, 1986. Leeds University Press.
12. A C Apling, "Approaches to the scaling of energy requirements in the minerals industry." Proceedings of the IIIrd Conference on Chemical Machinery, pp 12-15, 1987. Scientific Society of Mechanical Engineers, Budapest.
A C Apling, "Az orlesienergia-szukseglet becslesi modjai az asvanyelokeszitesben." Epitoanyag, Budapest, Volume 39, number 6, pp 161-192, 1987.
A C Apling and M Calvert, "Development of a model for the simulation of mineral and size distributions within a full-scale grinding circuit." K Fossberg (Ed), Proceedings of the XVIth International Mineral Processing Congress, Stockholm, pp 1645-1656, 1988. Elsevier, Amsterdam.
A C Apling and S Ersayin, "The effect of grinding on the kinetic characterisation of the flotation of a complex base metal sulphide ore." Y Aytekin (Ed), Proceedings of the II International Mineral Processing Symposium, Izmir, October 1988, pp129-137. Department of Mining Engineering, Dokuz Eylul University, Izmir, Turkey.
A C Apling and M Calvert, "The development and validation of an empirical ball mill model for the prediction of both size and mineralogical distribution of the product." Applied Mathematical Modelling, Volume 13, number 1, pp 12-20, January 1989.
A C Apling and B Ciptodi, "Studies of the rheology of coal water suspensions in relation to hydraulic transportation." Leeds University Mining Association Journal, pp119-127, 1989. Leeds University Press.
S Ersayin and A C Apling, "Tane boyu dagiliminin kalkopirit flotasyonunun kinetik parametreleri uzerine olan etkisi." (The effect of size distribution on the kinetic parameters of the overall flotation behaviour of chalcopyrite.) Proceedings of the XIth Mining Congress of Turkey, pp417-431, 1989
A C Apling and A Fletcher, "Influence of the mode of crushing on mineral liberation." K Schonert (Ed), 7th European Symposium Comminution, Ljubljana, Yugoslavia, June 1990, pp 259-272. Fakulteta za Naravoslovje in Tehnologijo, Vtozd Montanistika, Ljubljana. European Federation of Chemical Engineers.
S Ersayin and A C Apling, "Non sulphide gangue behaviour in sulphide flotation." Proceedings of the IIIrd International Mineral Processing Symposium, Istanbul. Department of Mining Engineering, Technical University of Istanbul, September 1990.
A C Apling and N Barrett, "Modelling the cone crusher: a review." Leeds University Mining Association Journal, pp119-128, 1991. Leeds University Press.
A C Apling and N Barrett, "A method for the incorporation of shape characterisation within a cone crusher model." Computer solutions in mining and processing, I.M.M. Leeds University, September 1991.
C Poole and A C Apling, "A review of selective flocculation at Leeds University." Leeds University Mining Association Journal, p83-90, 1992. Leeds University Press.
A C Apling and J Zhang, "A flotation model for the prediction of grade and recovery." Proceedings of the IV International Mineral Processing Symposium, Antalya, Turkey, October 1992. pp306-314.
A C Apling, T Brereton and R Wang, "A method for the determination of screen performance parameters." Leeds University Mining Association Journal, 1993, p 25-31.
T Brereton, A C Apling and R Wang, "The influence of screen feed rate and length on performance characteristics." Sixth Australian Coal Preparation Conference, Australian Coal Preparation Society, Mackay 6-9 September 1993, p 193-211.
A C Apling, T Brereton and R Wang, " The influence of screen motion on performance characteristics." Proceedings of the 12th International Coal Preparation Congress, Poland, May 1994. Jaxa Publishing, Crakow, Paper A3, p55-65
A C Apling, R Wang, T Brereton, "An investigation into factors affecting screen performance." Demirel H and Ersayin S (Eds), Proceedings of the Vth International Mineral Processing Symposium, Cappodocia, Turkey, September 1994, p39-46.
Alan Apling and Hasan Ergin, "Validation of a grinding model for a full-scale air swept cement mill." Demirel H and Ersayin S (Eds), Proceedings of the Vth International Mineral Processing Symposium, Cappodocia, Turkey, September 1994, p527-532. A.A. Balkema, Rotterdamm.
Alan Apling, "Comminution for size, shape and mineral liberation." Proceedings of International Symposium on Mineral Beneficiation, Nagpur, India October 3-4, 1994. Indian Bureau of Mines.
R.Wang, A.C.Apling, T.Brereton, "Describing the partition curve for the process of screening." Leeds University Mining Association Journal, 1994, p29-37.
A.C.Apling and N.B.Barrett, "Method for incorporation of shape characterization into cone crusher model." Transactions of the Institution of Mining and Metallurgy, Volume104, ppC1-10, Jan-April 1995
Ergin, H., Apling, A.C., 1995. "Prediction of the Performance Improvement of a Dry Air Swept Mill by a Simulation Technique." 14th Mining Congress of Turkey, Ankara, Turkey, p: 349-355
Alan Apling, Rulin Wang, Tom Brereton, "Turning up the heat." Mine and Quarry, (Minerals Engineering Society) Sept. 1996 pp 33-38.
A.C.Apling and N.B.Barrett. "Some factors which affect the generation of flaky particles by a cone crusher." Minerals Engineering 1996, 9,(6), pp 687-692.
Ergin, H., Apling, A.C., 1996. "Simulation of a Full Scale Cement Grinding Circuit." Proceedings of the 6th International Mineral Processing Symposium, Kusadasi, Turkey, September, p: 623-628
R.J. Chapman, A.C.Apling, K.Houseley and R.P.Watson. "Effect of grinding circuit design on the recovery of gold by gravity concentration." Advances in Gold Processing Technology, Institution of Mining and Metallurgy, 30th October 1996: Royal School of Mines. Paper 4.
K. Houseley, A.C. Apling, R.J. Chapman, R.P. Watson. "Use of homogeneous feed matrix for shape control during milling: effect on gold gravity concentration." Transactions of the Institution of Mining and Metallurgy, Volume 106, ppC142-144, 1997
Alan Apling and Murray Bwalya. "Evaluating high pressure milling for liberation enhancement and energy saving." Minerals Engineering 1997,10,(9),pp 1013-1021
K. Houseley, A.C. Apling and Chapman R.J. "Effect of particle size and shape on recovery of gold by use of a Knelson concentrator." Innovation in physical separation technologies, Richard Mozley Symposium Volume, IMM, 1998, p65-72.
A. C. Apling and A. Raissi "An evaluation of enhanced liberation by comminution under high pressure." Transactions of the Institution of Mining and Metallurgy 2000, Volume 109,C117-120.